1. Brunel University Research Archive
  2. College of Engineering, Design and Physical Sciences
  3. Dept of Mechanical and Aerospace Engineering
  4. Dept of Mechanical and Aerospace Engineering Research Papers
Please use this identifier to cite or link to this item: http://bura.brunel.ac.uk/handle/2438/26317
Full metadata record
DC FieldValueLanguage
dc.contributor.authorDimopoulos, A-
dc.contributor.authorZournatzis, I-
dc.contributor.authorGan, TH-
dc.contributor.authorChatzakos, P-
dc.date.accessioned2023-04-26T10:15:12Z-
dc.date.available2023-04-26T10:15:12Z-
dc.date.issued2023-04-26-
dc.identifierORCID iD: Tat Hean Gan https://orcid.org/0000-0002-5598-8453-
dc.identifier83-
dc.identifier.citationDimopoulos, A. et al. (2023) 'Correction: Dimopoulos et al. Multi-Response Optimization of Ti6Al4V Support Structures for Laser Powder Bed Fusion Systems. J. Manuf. Mater. Process. 2023, 7, 22', Journal of Materials Processing and Manufacturing Science, 2023, 7 (3), 83, pp. 1 - 2. doi: 10.3390/jmmp7030085.en_US
dc.identifier.urihttps://bura.brunel.ac.uk/handle/2438/26317-
dc.descriptionReference of original article: Dimopoulos, A. et al. (2023) 'Multi-Response Optimization of Ti6Al4V Support Structures for Laser Powder Bed Fusion Systems',.Journal of Materials Processing and Manufacturing Science, 7 (1), 22, pp. 1 - x. doi: 10.3390/jmmp7010022.en_US
dc.description.abstractError in Table: In the original publication [1], there is an error in Table 9. The Lower Limit of Laser Speed should be 1000 mm/s, not 100 mm/s. Error in Figure: In the original publication [1], there was a mistake in “Figure 12” as published. The value “1.13” in the warping deformation chart should be replaced with the value “0.13”. The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.en_US
dc.format.extent1 - 2-
dc.format.mediumElectronic-
dc.languageEnglish-
dc.language.isoen_USen_US
dc.publisherMDPIen_US
dc.rightsCopyright © 2023 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).-
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/-
dc.titleCorrection: Dimopoulos et al. Multi-Response Optimization of Ti6Al4V Support Structures for Laser Powder Bed Fusion Systems. J. Manuf. Mater. Process. 2023, 7, 22en_US
dc.typeArticleen_US
dc.identifier.doihttps://doi.org/10.3390/jmmp7030085-
dc.relation.isPartOfJournal of Materials Processing and Manufacturing Science-
pubs.issue3-
pubs.publication-statusPublished online-
pubs.volume7-
dc.identifier.eissn1062-0656-
dc.rights.holderThe authors-
Appears in Collections:Materials Engineering
Dept of Mechanical and Aerospace Engineering Research Papers

Files in This Item:
File Description SizeFormat 
FullText.pdfCopyright © 2023 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).592.72 kBAdobe PDFView/Open
Show simple item record


This item is licensed under a Creative Commons License Creative Commons