Collection's Items (Sorted by Submit Date in Descending order): 1 to 50 of 163
| Issue Date | Title | Author(s) |
| 13-Jan-2023 | Multi-Response Optimization of Ti6Al4V Support Structures for Laser Powder Bed Fusion Systems | Dimopoulos, A; Zournatzis, I; Gan, T-H; Chatzakos, P |
| 26-Apr-2023 | Correction: Dimopoulos et al. Multi-Response Optimization of Ti6Al4V Support Structures for Laser Powder Bed Fusion Systems. J. Manuf. Mater. Process. 2023, 7, 22 | Dimopoulos, A; Zournatzis, I; Gan, TH; Chatzakos, P |
| 15-Nov-2021 | Evaluation of eco-friendly concrete having waste PET as fine aggregates | Bamigboye, GO; Tarverdi, K; Umoren, A; Bassey, DE; Okorie, U; Adediran, J |
| 2020 | µECM process investigation and sustainability assessment | Mortazavi Nasiri, Mina |
| 2019 | Mechanism of Hot Ductility Loss and Recovery for Medium Carbon Steel with Boron and Titanium Additions | Dou, K; QING, LIU |
| 2019 | Modelling of Organic thin film transistors incorporating liquid crystalline metal phthalocyanines | Tsegie, Faris |
| 2018 | Alternative plate deformation phenomenon for squeeze film levitation | Almurshedi, Ahmed |
| 2014 | The effects of ultrasonic waves application during extrusionon the processing parameters and the properties of polyethylene | Khamsehnezhad, Amir |
| 2017 | Electrochemical generation of hydrogen | Syed Khurram, Raza |
| 2016 | Vestas V90-3MW Wind Turbine Gearbox Health Assessment Using a Vibration-Based Condition Monitoring System | Romero, A; Lage, Y; Soua, S; Wang, B; Gan, TH |
| 2016 | Tensile mechanical properties, constitutive parameters and fracture characteristics of an as-cast AA7050 alloy in the near-solidus temperature regime | Subroto, T; Miroux, A; Eskin, DG; Katgerman, L |
| 2016 | Experimental study on the fire behaviour of reinforced concrete slabs under combined uni-axial in-plane and out-of-plane loads | Wang, Y; Huang, Z; Yuan, G; Lyv, J; Li, Z; Wang, T |
| 2015 | Graphene oxide thin films for resistive memory switches | Harris, P; Salimian, A; Banerjee, I; Ray, AK |
| 2015 | Effect of heat treatment and Fe content on the microstructure and mechanical properties of die-cast Al-Si-Cu alloys | Yang, H; Ji, S; Fan, Z |
| 1999 | A casting classification and coding system suitable for a CIMS in casting production | Ji, S; Vuorinen, J; Fan, Z |
| 2015 | Investigation of mechanical and corrosion properties of an Al-Zn-Mg-Cu alloy under various ageing conditions and interface analysis of η' precipitate | Yang, W; Ji, S; Zhang, Q; Wang, M |
| 2013 | Improvement of mechanical properties of HPDC A356 alloy through melt quenching process. | Ji, S; Fan, Z; Yang, W; Jiang, B |
| 2015 | Casting development with a high strength aluminium alloy | Ji, SX; Yan, F; Fan, ZY |
| 2015 | Comparison between low-order and high-order acoustic pressure solvers for bubbly media computations | Lebon, GSB; Tzanakis, I; Pericleous, K; Eskin, D |
| 2015 | Comparison of cavitation intensity in water and in molten aluminium using a high-temperature cavitometer | Tzanakis, I; Lebon, GSB; Eskin, D; Pericleous, K |
| 2016 | Effect of ultrasonic melt treatment on the refinement of primary Al3Ti intermetallic in an Al-0.4Ti alloy | Eskin, D; Wang, F; Connolley, T; Mi, J |
| 2015 | Hemp nanocellulose: fabrication, characterisation and application | Dasong, Dai |
| 2015 | Cathodoluminescence and electron microscopy of red quantum dots used for display applications | Fern, G; Silver, J; Coe-Sullivan, S |
| 2014 | Ferritic stainless steels in structural applications | Cashell, KA; Baddoo, NR |
| 2009 | Solidification behavior and microstructural evolution of near-eutectic Zn-Al alloys under intensive shear | Ji, S; Fan, Z |
| 2010 | Method to obtain nonuniformity information from field emission behavior | de Paulo, AC; Parades, P; den Engelsen, D; Santos, TEA; Mammana, VP |
| 2008 | Study of a micro chamber quadrupole mass spectrometer | Zhang, X; Mao, F; Xiao, M; Cui, Y; den Engelsen, D; Lei, W |
| 2013 | Cathodoluminescence of powder layers of nanometer-sized Y2O3:Eu and micrometer-sized ZnO:Zn phosphor particles | Harris, P; Ireland, T; Withnall, R; Silver, J |
| 2009 | Effect of microstructural evolution on magnetic properties of Ni thin films | Kumar, P; Krishna, MG; Bhattacharya, AK |
| 2011 | High-mobility solution-processed copper phthalocyanine-based organic field-effect transistors | Chaure, NB; Cammidge, AN; Chambrier, I; Cook, MJ; Cain, MG; Murphy, CE; Pal, C; Ray, AK |
| 2011 | Discovery of two new phases of zirconium tetrakis(8-hydroxyquinolinolate): synthesis, crystal structure and their electron transporting characteristics in organic light emitting diodes (OLEDs) | Kathirgamanathan, P; Surendrakumar, S; Antipan-Lara, J; Ravichandran, S; Reddy, VR; Ganeshamurugan, S; Kumaraverl, M; Arkley, V; Blake, AJ; Bailey, D |
| 2012 | Sound transmission testing of polymer compounds | Allan, PS; Ahmadnia, A; Withnall, R; Silver, J |
| 1987 | Abrasive wear with particular reference to digger teeth | Mashloosh, KM |
| 1999 | Application of acoustic emission sensing for the non-destructive evaluation of advanced composite materials | Baillie, Paul WR |
| 1988 | A study of the extrusion of particulate cellulosic composite materials | Wahlers, John Colin |
| 2012 | Novel lithium Schiff-base cluster complexes as electron injectors: synthesis, crystal structure, thin film characterisation and their performance in OLEDs | Kathirgamanathan, P; Surendrakumar, S; Antipan-Lara, J; Ravichandran, S; Chan, YF; Arkley, V; Ganeshamurugan, S; Kumaraverl, M; Paramswara, G; Partheepan, A; Reddy, VR; Bailey, D; Blake, AJ |
| 2012 | A novel method for the preparation of non-agglomerated nanometre sized particles of lanthanum phosphate phosphors utilising a high surface area support in the firing process | Salimian, A; Fern, GR; Withnall, R; Silver, J |
| 2012 | A liquid crystalline copper phthalocyanine derivative for high performance organic thin film transistors | Chaure, NB; Pal, C; Barard, S; Kreouzis, K; Ray, AK; Cammidge, AN; Chambrier, I; Cook, MJ; Murphy, CE; Cain, MG |
| 2009 | Experimental study of extrusion and surface treatment of organo clay with PET nano-composites | Tarverdi, K; Sontikaew, S; Allan, P |
| 2009 | PIM moulding of post consumer mixed plastics | Qi, K; Song, J; Tarverdi, K |
| 2009 | Influences of impurities in recycled plastics on properties of PIM sandwich panels | Qi, K; Song, J; Tarverdi, K |
| 2013 | Twin screw extrusion pre-treatment of wheat straw for biofuel and lignin biorefinery applications | Ng, Thian Hong |
| 2001 | Non-destructive characterisation of structural ceramics using impedance spectroscopy | Wang, Xin |
| 1997 | The characterisation of alginate systems for biomedical applications | Sartori, Celine |
| 1990 | Study of gold-based alloy phase diagrams | Butt, M Taqi Zahid |
| 2013 | Novel bio-composites based on whole utilisation of wheat straw | Zhao, Lei |
| 2009 | Failure analysis of a steel motorcycle kickstand | Huda, Z; Shi, KW; Bulpett, R |
| 1993 | Synthesis and characterisation of polyamide 6 blends made by reactive extrusion | Tung, Joo Fai |
| 1995 | Structure-property characterisation of ternary phase polypropylene composites | Premphet, Kalyanee |
| 1981 | The mechanical and other properties of ionomer cements | Read, Michael John |
Collection's Items (Sorted by Submit Date in Descending order): 1 to 50 of 163
