Collection's Items (Sorted by Submit Date in Descending order): 131 to 180 of 470
Issue Date | Title | Author(s) |
2018 | Functionalisation of clay aerogel composites for applications in construction | Abo Madyan, Omar |
2018 | Investigation of diesel-ethanol and diesel-gasoline dual fuel combustion in a single cylinder optical diesel engine | Mirmohammadsadeghi, Mahmoudreza |
2018 | Fundamental characterisation of thermal influence in hot mix asphalt repair | Byzyka, Juliana |
2018 | Design and fabrication of GaPO4 ultrasonic transducer for NDT at high temperatures | Kostan, Mario |
2018 | Bio-foams for thermal packaging applications | Torrejon, Virginia Martin |
2018 | Metal and oxide nanoparticles: Green biosynthesis using Portobello Mushroom Spores (PMS) for nanocomposites and replicas, properties and applications | AL-Timimi, Iman Abdullah Jaaffer |
2018 | Alternative plate deformation phenomenon for squeeze film levitation | Almurshedi, Ahmed |
2018 | Towards the noise reduction of synthetic jet actuators using lobed orifices | Jeyalingam, Jonne |
2018 | An investigation into the manufacture and mechanical properties of an al-steel hybrid MMC | Davenport, Rebecca A. |
2018 | Investigation of cochlear disturbance induced during surgical intervention | Zhang, Yu |
2017 | Effects of welding parameters on the integrity and structure of HDPE pipe butt fusion welds | Shaheer, Muhammad |
2017 | Influences on consumers’ decision making and recognition memory: An investigation using fMRI, EEG and behavioural methods | Li, Lin |
2018 | A novel, internally structured stainless steel implant with titanium characteristics | Yazdifar, Mohammadreza |
2018 | Experimental study of a Miller cycle based approach for an efficient boosted downsized gasoline Di engine | Li, Yuanping |
2018 | Flow boiling in vertical small to micro scale tubes | Al Gaheeshi, Asseel Majed Rasheed |
2018 | Investigation of residual stresses in X65 narrow-gap pipe girth welds | Ren, Yao |
2018 | Experimental study of single sided ventilation through a multi-configuration slotted louvre system | O'Sullivan, Paul D. |
2018 | An experimental investigation of lean-burn dual-fuel combustion in a heavy duty diesel engine | May, Ian Alexander |
2017 | Statistical modelling of ECDA data for the prioritisation of defects on buried pipelines | Bin Muhd Noor, Nik Nooruhafidzi |
2016 | Mechanical behaviour of lined pipelines under welding and impact | Obeid, Obeid |
2017 | Modelling of novel rotating membrane bioreactor processes | Jones, Franck Anderson |
2018 | Electroencephalography (EEG) profile and sense of body ownership: a study of signal processing, proprioception and tactile illusion | Shahriari, Sheyda |
2017 | The forced vibrations of a cylinder at low Reynolds number flow, an investigation of the non-lock-in and lock-in regions | Angelopoulos, Konstantinos |
2018 | Vortex shedding-induced noise reduction using (DBD) plasma actuator | AL-Sadawi, Laith Ayad |
2018 | Crack tip opening displacement (CTOD) in single edge notched bend (SEN(B)) | Khor, WeeLiam |
2017 | Experimental and numerical study of air distribution and thermal environment control for chilled food manufacturing facilities | Parpas, Dimitris |
2018 | Numerical and experimental investigation of a multi-pass heat-pipe-based heat exchanger | Mroue, Hassan |
2018 | Interface optimisation and bonding mechanism of rubber-wood-plastic composites | Zhou, Yonghui |
2018 | Radial turbine expander design, modelling and testing for automotive organic Rankine cycle waste heat recovery | Alshammari, Fuhaid |
2018 | GPU accelerated linear system solvers for OpenFOAM and their application to sprays | Dyson, Joshua |
2018 | Solidification behaviour of Fe-rich intermetallic compounds in aluminium alloys | Zhou, Yipeng |
2017 | An experimental study of ethanol-diesel dual-fuel combustion for high efficiency and clean heavy-duty engines | Bernardes Pedrozo, Vinícius |
2015 | Investigation into using Stand-Alone Building Integrated Photovoltaic System (SABIPV) as a fundamental solution for Saudi rural areas and studying the expected impacts | Albaz, Abdulkarim |
2017 | Oscillatory behaviour and strategy to reduce drilling vibration | Che Kar, Suriani Binti |
2016 | Development of nano-graphene cementitious composites (NGCC) | Ilyas, Muhammad |
2017 | Bonding mechanisms and strength of hooked-end steel fibre reinforced cementitious composites | Abdallah, Sadoon Mushrif |
2017 | Operation optimisation towards generation efficiency improvement in Saudi Arabia using LSS, simulation and mathematical programming | Althaqafi, Mohammad |
2018 | Preparation and characterisation of colour converting layers for OLEDs | Mazzocut, Andrea |
2017 | Supply chain visibility tools usage and their impact on on-time delivery: a case study of a fast moving consumer goods small, medium enterprise in London | Silvera, Yolanda |
2017 | Experimental and computational study to improve energy efficiency of frozen food retail stores | Mylona, Zoi |
2017 | Stress-Strain data for metals in bar and sheet form: strain rate, thickness and temperature influences | Roshanaei, Sina |
2017 | Fatigue life prediction of threaded pipe connection | Beheshti, Milad |
2017 | The effects of Alumina purity, TICUSIL® braze preform thickness and post-grinding heat treatment on the microstructure, mechanical and nanomechanical properties of Alumina-to-Alumina brazed joints | Kassam, Tahsin Ali |
2017 | Guided wave evaluation of pipes using the first and second order torsional wave mode | Deere, Matthew |
2017 | Evaluation of de-icing chemical and moisture mass transfer in freezing soils | Sarsembayeva, Assel |
2017 | The mechanism of leak-before-break fracture and its application in engineering critical assessment | Bourga, Renaud |
2017 | Statistical methods for the analysis of corrosion data for integrity assessments | Tan, Hwei-Yang |
2017 | 3D freeform surface measurement on coordinate measuring machine using photometric stereo method | Somthong, Thammarat |
2017 | Experimental and computational study of indirect expansion solar assisted heat pump system with latent heat storage for domestic hot water production | Youssef, Walid Mohamed Khalil Abdalla |
2016 | Development of an active morphing wing with novel adaptive skin for aircraft control and performance | Kaygan, Erdogan |
Collection's Items (Sorted by Submit Date in Descending order): 131 to 180 of 470