Alternative plate deformation phenomenon for squeeze film levitation

Abstract

This thesis deals with a theoretical and an experimental exploration of squeeze film levitation (SFL) of light objects. The investigations aimed to find the important design parameters controlling this levitation mechanism and also to suggest an alternative way to implement SFL. The study, through computer modelling and experimental validation, focused on Poisson’s contraction effect for generating SFL. A finite element model (ANSYS) was verified by experimental testing of five different plate designs. Each plate was subjected to a uniaxial plain stress by an arrangement of two hard piezoelectric actuators (PZT) bonded to the bottom of the plate and driven with DC or AC voltages. It was observed that pulsation of a dimple or crest shaped elastic deformation along the longitudinal axis in the central area of the plate was created because of Poisson’s contraction. This Poisson’s effect generated the squeeze-film between the plate and the levitated object. The separation distance between a floating lightweight object and the plate was analysed using computational fluid dynamics (ANSYS CFX) through creation of a modelling model for the air-film entrapped between the two interacting surfaces – a typical three-dimensional fluid-solid interaction system (FSI). Additionally, the levitation distance has been experimentally measured by a Laser Sensor. A satisfactory agreement has been found between model predictions and experimental results. Two levitation systems, one based on a horn transducer (Langevin type) and the other one in the form of a plain rectangular plate made of Aluminium and firmly fastened at both ends with a surface-mounted piezoelectric actuator, were compared in this thesis. Both devices were based on SFL mechanism. Evidently, the performances of both designs were greatly influenced by the design structure and in particular by the driving plate characteristics such as plate size and geometry as well as the driving boundary conditions. To this end, physical experiments were carried out and it was found that the device utilising horn-type transducer yields better levitation performance. Ultimately, the research explained the confusion between three approaches to non-contact levitation through literature review and also pointed out some essential parameters like piezoelectric actuators location, material of the driving structure, coupled-field between the actuators and the driving structure and the fluid-solid interface that was existed between the excited plate and the levitated object.