Please use this identifier to cite or link to this item: http://bura.brunel.ac.uk/handle/2438/7373
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorNi, Q-
dc.contributor.authorAli, Usman Ahmed-
dc.date.accessioned2013-04-24T14:46:11Z-
dc.date.available2013-04-24T14:46:11Z-
dc.date.issued2013-
dc.identifier.urihttp://bura.brunel.ac.uk/handle/2438/7373-
dc.descriptionThis thesis was submitted for the degree of Master of Philosophy and was awarded by Brunel University on 9 July 2008.en_US
dc.description.abstractWiMax (Worldwide Interoperability for Microwave Access) is a promising wireless technology with the aim of providing the last mile wireless broadband access designed for both fixed and mobile consumers as an alternative solution to the wired DSL and cable access schemes. The purpose of this research project is to investigate efficient resource allocation algorithms for WiMax. To achieve this goal, we investigate efficient PHY layer Partial Usage of SubCarriers (PUSC) allocation as well as MAC layer piggyback bandwidth request mechanisms. At the PHY layer we proposed improvements on the Uplink and Downlink PUSC subcarrier allocation scheme. For the Uplink PUSC we suggested a method by allocating different frequencies to neighbouring cells in combination with the Integer Frequency Reuse (IFR) and Fractional Frequency Reuse (FFR) in order to reduce interferences and collisions. The simulation results exhibit that collision rates can be reduced to zero for both IFR and FFR patterns with the proposed improvement by assuming that perfect power control is used in the system. In addition, there is no collision at cell edges. The results also show that FFR patterns achieve lower inter-cell interference and higher capacities as compared to the IFR patterns. For the Downlink PUSC we introduced an offset scheme with the purpose of increasing the number of users in the system. At the MAC layer we propose an improvement on the piggyback bandwidth request mechanism by increasing the size of the piggyback bandwidth request in order to reduce the number of bandwidth requests and hence improve the resource utilisation. The simulation results demonstrate that our improved scheme achieves higher throughput, less delay and packet loss rates as compared to the standardised piggyback bandwidth request mechanism.en_US
dc.language.isoenen_US
dc.publisherBrunel University School of Engineering and Design Theses-
dc.subjectWiMAXen_US
dc.subjectPiggybacken_US
dc.subjectFUSCen_US
dc.subjectPUSCen_US
dc.subjectFFRen_US
dc.subjectIFRen_US
dc.titleInvestigation of efficient resource allocation schemes for WiMAX networksen_US
dc.typeThesisen_US
Appears in Collections:Electronic and Computer Engineering
Dept of Electronic and Electrical Engineering Theses

Files in This Item:
File Description SizeFormat 
FulltextThesis.pdf1.18 MBAdobe PDFView/Open


Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.