Showing results 80 to 99 of 119
< previous
next >
| Issue Date | Title | Author(s) |
| 27-Feb-2026 | Nano CaCO₃ seeding for improving properties of limestone calcined clay cement through in-situ carbonation | Niu, Z; Zhou, X; Hou, P; Liu, M; Liang, S; Sun, Y; Zhao, Y; Wang, J |
| 3-Jan-2025 | Net zero carbon buildings: A review on recent advances, knowledge gaps and research directions | Myint, NN; Shafique, M; Zhou, X; Zheng, Z |
| 28-Apr-2022 | A New Analytical Model for Deflection of Concrete Beams Reinforced by BFRP Bars and Steel Fibres under Cyclic Loading | Zhu, H; Li, Z; Chen, Q; Cheng, S; Li, C; Zhou, X |
| 4-Sep-2017 | Nonlinear three–dimensional finite–element modelling of reinforced–concrete beams: Computational challenges and experimental validation | Earij, A; Alfano, G; Cashell, K; Zhou, X |
| 2016 | Numerical Analysis of Shear-off Failure of Keyed Epoxied Joints in Precast Concrete Segmental Bridges | Shamass, R; Zhou, X; Wu, Z |
| 15-Nov-2025 | Numerical sensitivity analysis of cement sheath bond integrity for CO2 injection wells under pressure and thermal loading | Hosking, L; Al-Noaimat, YA; Zhou, X; Zagorscak, R; Benbow, S; Metcalfe, R |
| 2009 | Numerical simulation of ram extrusion in short-fiber-reinforced fresh cementitious composites | Zhou, X; Li, Z |
| 2014 | On utilization of elliptical rings in assessing cracking tendency of concrete | Zhou, X; Oladiran, OG; Dong, W |
| 26-Sep-2018 | Optical cleanliness measurement methods for aluminium sheet surfaces | Wang, J; Andrews, P; Butler, C; McAlpine, E; Scamans, G; Zhou, X |
| 6-Oct-2021 | Optimization of mechanical and antibacterial properties of Ti-3wt%Cu alloy through cold rolling and annealing | Yang, H; Zhu, M; Wang, J; Ma, C; Zhou, X; Xing, H; Zhang, E; Ji, S |
| 24-Jan-2026 | A parametric evaluation of rooftop photovoltaic utilization and yield density considering urban morphology effects | Fathy, F; Shamass, R; Zhou, X |
| 30-Apr-2025 | The Potential of Wood Ash to Be Used as a Supplementary Cementitious Material in Cement Mortars | Lescinskis, O; Sapata, A; Bumanis, G; Sinka, M; Zhou, X; Bajare, D |
| 2017 | Preparation conditions for the synthesis of alkali-activated binders using tungsten mining waste | Kastiukas, G; Zhou, X; Castro-Gomes, J |
| 2017 | Pull-out Behaviour of Hooked End Steel Fibres Embedded in Ultra-high Performance Mortar with Various W/B Ratios | Abdallah, S; Fan, M; Zhou, X |
| 2017 | Quantifying the influence of elliptical ring geometry on the degree of restraint in a ring test | Dong, W; Zhou, X; Wu, Z; Luo, H; Kastiukas, G |
| 1-Nov-2024 | Regulating hydration and microstructure development of reactive MgO cement by citric acids | Wang, H; Liang, S; Zhou, X; Hou, P; Cheng, X |
| 8-Feb-2022 | Regulations on the hydration, morphology, and sulfate-attack resistivity of C3A with micro/nano-silica particles | Hou, P; Wang, X; Zhou, X; Cheng, X; Shah, SP |
| 2017 | A Review on Mineral Waste for Chemical-activated Binders: Mineralogical and Chemical Characteristics | Sedira, N; Castro Gomes, J; Kastiukas, G; Zhou, X; Vargas, A |
| 2013 | Rheology of semi-solid fresh cement pastes and mortars in orifice extrusion | Zhou, X; Li, Z; Fan, M; Chen, H |
| 14-Aug-2024 | Segregation of Mg at TiB<inf>2</inf>/Al interface mitigating the Zr-poisoning effect | Wang, S; Wang, Y; Zhang, Y; Wang, F; Hashimoto, T; Zhou, X; Fan, Z; Ramasse, Q |
