Brunel University Research Archive(BURA) preserves and enables easy and open access to all
types of digital content. It showcases Brunel's research outputs.
Research contained within BURA is open access, although some publications may be subject
to publisher imposed embargoes. All awarded PhD theses are also archived on BURA.
Please use this identifier to cite or link to this item:
http://bura.brunel.ac.uk/handle/2438/9407| Title: | Numerical Studies on Geometric Features of Microchannel Heat Sink with Pin Fin Structure |
| Authors: | Zhao, J Gong, L Huang, S 4th Micro and Nano Flows Conference (MNF2014) |
| Keywords: | Pin-fin microchannel;Geometric features;Numerical simulation;Thermal performance |
| Issue Date: | 2014 |
| Publisher: | Brunel University London |
| Citation: | 4th Micro and Nano Flows Conference, University College London, UK, 7-10 September 2014, Editors CS König, TG Karayiannis and S. Balabani |
| Series/Report no.: | ID 180 |
| Abstract: | The manifold microchannel (MMC) heat sink is an effective method of electronic device cooling featured by the advantages such as low thermal resistance, compact structure, low flow rate and uniform temperature distribution along the flow direction. To improve the performance of MMC, numerical studies on geometry features of pin fin microchannel were carried out and the characteristics of flowing and heat transfer in two types of MMC structures which are respectively optimized through porosity with different pin-fin distribution and pin-fin located angle were investigated. Numerical results indicated that there are apparent influences of both above geometry features on the characteristics of flowing and heat transfer in MMC. Based on cooling performance factor, an optimum value of porosity with specific pin-fin distribution was obtained. Moreover, better effect on heat transfer could be achieved at a 30 degree around of rectangular pin fin located angle in our work. |
| Description: | This paper was presented at the 4th Micro and Nano Flows Conference (MNF2014), which was held at University College, London, UK. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute, ASME Press, LCN London Centre for Nanotechnology, UCL University College London, UCL Engineering, the International NanoScience Community, www.nanopaprika.eu. |
| URI: | http://bura.brunel.ac.uk/handle/2438/9407 |
| ISBN: | 978-1-908549-16-7 |
| Appears in Collections: | Brunel Institute for Bioengineering (BIB) The Brunel Collection |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| Draft-MNF-180-FinalA.pdf | 500.95 kB | Adobe PDF | View/Open |
Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.