In vivo mechanical assessment of human elbow kinematics using a six axis parallel mechanism developed in house

Abstract

Elbow joint laxity is a problem that normally comes with age; it increases up to critical levels due to rupture or damage to the ligaments of the elbow and affects the stability and capacities of the joint, interfering even with daily activities. This work investigates the kinematics of the elbow through in-vivo experimental measurement. To this end, a platform based on Stewart Platform mechanism was built and used at the bioengineering labs of Brunel University in West London, the UK, to measure the six degrees of freedom of the joint. This thesis aims to develop a method to simulate such motion which could be used for elbow implant design and manufacture. This work contributes to both the basic science of joint movement measurement and to the clinical applications of diagnosing elbow illness. In addition this research presents the preliminary results for a design for elbow implants. Tracking system developed in house was used to measure the degrees of freedom in healthy elbow motion. A pilot study was performed to assess the joint motion and its repeatability. A group of volunteers with normal elbow movement was used to carry out this study. A Stewart Platform mechanism based on the tracking system was used in this study as a non-invasive tool to capture elbow joint motion and track the trajectory and pattern of the motion in three-dimensional space. This thesis aimed to develop a method to simulate the elbow joint motion that could potentially be used for the elbow implants design and there manufacture. The goal of this study was achieved by in vivo measurement of the elbow movement. It was found that the results vary from person to person, but a healthy pattern of motion can be distinguished from an abnormal pattern. To ensure the result, the motion of the right and left hand of each person was compared,allowing the behaviour of the elbow motion to be judged and the results can help surgeons to analyze the motion of the elbow joint and follow up suspicions of abnormal behaviour in the joint or trace any possible joint laxity. Furthermore, the errors involved with the mechanism were calculated and appropriate factors were applied to correct them. As part of this study the manufacturing of medical implants was reviewed and discussed.