Collection's Items (Sorted by Submit Date in Descending order): 31 to 80 of 469
Issue Date | Title | Author(s) |
2022 | A fundamental understanding of Al-Ni-Mn alloys: microstructure, mechanical properties, solidification and minor alloying | Fang, Jiao |
2022 | An ontology-based semantic building post-occupancy evaluation framework and its application | Zhao, Yuanhong |
2022 | Transient modelling of heat pipe heat exchangers with vertical thermosyphons for the purpose of waste heat recovery from industrial exhaust gases | Brough, Daniel J. |
2021 | Investigation on a multiscale sustainable manufacturing approach to production changeover complexity reduction and its implementation through smart surfaces and process optimization | Mustafa, Khalid |
2022 | Experimental study of a novel valvetrain system on SI engine efficiency and emissions | Minasyan, Anna |
2021 | An investigation into multi-component gasoline biofuel droplet and spray using non-ideal vapour-liquid equilibrium models | Yang, Wan |
2021 | Flow boiling in multi microchannels using refrigerant R134a and R1234yf | Al-Janabi, Rand Mohamad Ali |
2022 | Numerical investigation and experimental validation of a heat pipe based PV/T system | Khordehagh, Navid |
2021 | Technological assessment of animal waste-based energy conversion systems | Katsaros, Giannis |
2019 | Nanoclay synergy in flame retarded glass reinforced polypropylene/polyamide 6 blend | Shamas, Ahmed |
2021 | Predicting fatigue life of welded joints under variable amplitude loading spectra | Liu, Xu |
2020 | Innovative approaches for nanocellulose functionalisation | Ahmad, Hassan |
2020 | Conceptual design and development of a research tool: - the Vagina-on-chip (VOC) | Naveenathayalan, Angel Kayalvilli |
2021 | Novel approaches towards mooring integrity in-situ monitoring fatigue crack growth evaluation using acoustic emission parametrical analysis | Angulo Grandmontagne, Ángela |
2021 | Supercritical carbon dioxide power cycles for waste heat recovery applications | Marchionni, Matteo |
2021 | Aerofoil self noise reduction by innovative trailing edge treatment | Woodhead, Philip Charles |
2021 | Towards the production of adsorbents from mixed domestic discarded materials using heat pipe pyrolysis | Hoslett, John Joseph |
2021 | On the quantification of arterial wall mechanical properties using invasive and non-invasive experimental investigations and analytical techniques | Giudici, Alessandro |
2021 | Experimental, computational and sustainability study of energy-efficient technologies for residential buildings in hot countries | Shittu, Emmanuel |
2021 | Development of the hot forming system using reconfigurable forming dies, digital twin and topology optimisation | Aly, Belal M |
2021 | Effects of seismic soil-structure interaction on the analysis, design and behaviour of structures during their entire life cycle | Alisawi, Alaa |
2021 | Modelling of gasoline injection process and its application to the development of a new GDI engine | Peethambaram, Mohan Raj |
2021 | Material bond, formation, and growth, in Al/Mg compound castings | Schneider, Kilian |
2020 | An experimental study on high pressure sprays and on the combustion and sooting tendencies of oxygenated fuels | Ruiz Rodriguez, Irene del Carmen |
2021 | Optimisation of waisted tensile test specimen geometry and determination of tensile energy welding factors for different polyethylene pipe wall thicknesses | Taghipourfard, Mohammad |
2021 | Probability of failure feedback loop due to internal corrosion in oil production systems | Quinn, Martin |
2021 | Physically based constitutive model for damage in composites under dynamic loads | Gałka, Agata Zuzanna |
2021 | Development of Innovation Acceptance Model for Wearable Computing: A Study of Users’ Technology Acceptance in Malaysia | Mohamad Taib, Syakirah |
2021 | Impact of joining dissimilar steel and aluminium for future automotive structures | Oliveira, André |
2021 | Fractional solidification for recycled aluminium alloys | Venditti, Susanna |
2021 | Thermal and residual stress analysis of welded joints in cladded pipelines | Kogo, Bridget Enoba |
2021 | Artificial intelligence for optimisation and demand side response in built environment | Mesa Jiménez, José Joaquín |
2021 | Casting integrity of high-pressure die-castings | Lordan, Ewan |
2021 | Application of upstream wind tunnel model mounting to the investigation of lobe-mixing geometries for road vehicle drag reduction | Rejniak, Aleksandra Anna |
2021 | Investigations into the utilisation of chicken litter for power generation | Simbolon, Luga Martin |
2020 | Development of a biological electrochemical system for decentralised wastewater treatment and energy production in remote and under-served regions | Fudge, Thomas |
2019 | Modelling of shock waves in FCC and BCC metals using a dislocation based continuum approach | Kiely, Lewis |
2021 | Flow Boiling of HFE-7200 in Multi-Microchannel Heat Sinks for High-Heat Flux Applications | Lee Yue Sze, Vivian |
2021 | Computational fluid dynamic of single and two phase flow in microchannels | Sahar, Amirah Mohamad |
2020 | Methods for surface age estimation and study of evaporative cooling induced air-water gas transfer | Ali, Fatima |
2021 | Classification of Small to Medium Size Manufacturing Enterprises in Fluctuating Economic Conditions | Sayad Saravi, Atefeh |
2020 | Optical Studies of Gasoline Sprays and In-cylinder Mixture Formation using a High Pressure Multi-hole Injector | Dhanji, Meghnaa Paresh |
2019 | A novel strategy for controlling forklift’s mast vibration | Esmaeili, Siavash |
2020 | The development of high strength multi-component Al-based die-cast alloys | Cai, Qing |
2020 | Investigation of the Smart Tooling System and Dynamics in Ultraprecision Machining of Freeform Surfaces and its Implementation Perspective | Khaghani, Ali |
2020 | Arterial tree taper and bifurcations: implications on wave reflection and pressure at the aortic root using a one-dimensional computational model | Abdullateef, Shima |
2020 | Investigation of fracture behaviour of pipelines containing flaws subjected to plastic straining in the presence of yield discontinuity | Wang, Longjie |
2020 | Investigation on the multiscale multiphysics based approach to modelling and simulation in abrasive flow machining of aerofoil structures and its application perspectives | Shao, Yizhi |
2020 | Experimental and CFD investigation of the solidification of blood plasma using heat pipe based cryo-freezer storage system | Chauhan, Amisha |
2020 | The effect of hip muscle contraction on stress response of the lower extremities during the normal walking | Mahdi, Hossaeini Marashi |
Collection's Items (Sorted by Submit Date in Descending order): 31 to 80 of 469