Large eddy simulation of plume dispersion behind an aircraft in the take-off phase

Abstract

The aim of this paper is to provide an investigation, using large eddy simulation, into plume dispersion behind an aircraft in co-flowing take-off conditions. Validation studies of the computational model were presented by Aloysius and Wrobel (Environ Model Softw 24:929–937, 2009) and a study of the flow and dispersion properties of a double-engine aircraft jetwas presented by Aloysius et al. EEC/SEE/2007/001,EUROCONTROLExperimentalCentre, http://www.eurocontrol.int/eec/gallery/content/public/document/eec/report/2007/ 032_ALAQS_comparison_of_CFD_and_Lagrangian_dispersion_methods.pdf), in which only the engine was modelled. In this paper, the complete geometry of a Boeing 737 is modelled and investigated. The currentwork represents a contribution towards a better understanding of the source dynamics behind an airplane jet engine during the take-off and landing phases. The information provided from these simulations will be useful for future improvements of existing dispersion models.