Experimental pool boiling investigations of vertical coalescence for FC-72 on silicon from an isolated artificial cavity

Abstract

In this study bubble growth from an isolated artificial cavity micro-fabricated on a horizontal 380 µm thick silicon wafer was investigated. The horizontally oriented boiling surface was heated by a thin resistance heater integrated on the rear of the silicon test section. The temperature was measured using an integrated micro-sensor situated on the boiling surface with the artificial cavity located in its geometrical centre. A resistive track was used as the sensor, which when calibrated, exhibited a near-linear behaviour with increasing temperature. To conduct pool boiling experiments the test section was immersed in degassed fluorinert FC-72. Bubble nucleation, growth and detachment at different pressures were observed using high-speed imaging. Coalescence was observed at the boundary between the isolated bubble and interference regimes. The occurrence of vertical coalescence was found to be more frequent, with increasing wall superheat and decreasing pressure. The equivalent sphere volumes of two bubbles before and after coalescence were evaluated from area measurements. It was observed that the second nucleated bubble is always smaller than its predecessor. The vapour generation appears not to stop during coalescence as the volume of the merged bubble was typically 5-18% larger than the sum of the bubble volumes just before coalescence.