Please use this identifier to cite or link to this item: http://bura.brunel.ac.uk/handle/2438/25141
Title: The Effects of Solid Particle Containing Inks on the Printing Quality of Porous Pharmaceutical Structures Fabricated by 3D Semi-Solid Extrusion Printing
Authors: Teoh, X-Y
Zhang, B
Belton, P
Chan, S-Y
Qi, S
Keywords: 3D printing;dimensional fidelity;ink rheology;particle size;semi-solid extrusion
Issue Date: 3-Jun-2022
Publisher: Springer
Citation: Qi, S. et al. (2022) The Effects of Solid Particle Containing Inks on the Printing Quality of Porous Pharmaceutical Structures Fabricated by 3D Semi-Solid Extrusion Printing. Pharm Res., vol. 39 (6), pp. 1267 - 1279. https://doi.org/10.1007/s11095-022-03299-7
Abstract: Purpose Semi-solid extrusion (SSE) 3D printing has potential pharmaceutical applications for producing personalised medicine. However, the effects of ink properties and drug incorporation on the quality of printed medication have not been thoroughly studied, particularly for porous geometries. This study aimed to investigate the effects of the presence of solid drug particles in SSE inks on the printing quality of porous structures. Method The rheological behaviour of model inks of paracetamol (PCM)-hypromellose (HPMC) with different drug loadings were investigated and correlated to their printing qualities. Results For the inks with PCM loading above the drug solubility in which suspended solid drug particulates were present, the results confirmed that PCM loading and particle size significantly affected the ink viscosities at a low shear rate. At a low shear rate, the highest viscosity was identified when the highest drug loading and the smallest PCM particles were incorporated into the inks. However, the results indicated that the SSE printing parameters and printing quality of porous structures (with less porous structural deformation) have no clear correlation with the shear viscosity data, but a strong correlation with the dynamic oscillatory rheology of the inks. Conclusion The key rheological parameters including storage modulus, loss modulus and complex viscosity of the ink increased with increasing drug loading for the inks containing solid drug particles. However, decreasing the particle size did not have a clear effect on the oscillatory rheology of the inks which can be potentially used for optimising the SSE 3D printing quality of porous geometries.
URI: http://bura.brunel.ac.uk/handle/2438/25141
DOI: http://dx.doi.org/10.1007/s11095-022-03299-7
ISSN: 0724-8741
1573-904X
Appears in Collections:Dept of Mechanical and Aerospace Engineering Research Papers

Files in This Item:
File Description SizeFormat 
FullText.pdf2.08 MBAdobe PDFView/Open


This item is licensed under a Creative Commons License Creative Commons