Collection's Items (Sorted by Submit Date in Descending order): 101 to 150 of 644
| Issue Date | Title | Author(s) |
| 2018 | Experimental study of the impact of port and direct fuel injection strategies on the efficiency, performance and emissions of a downsized GDI engine | Golzari, Reza |
| 2018 | Investigation and improvement of a pcm-air heat exchanger to reduce energy use in buildings | Santos, Thiago Victor de Oliveira |
| 2018 | Multiple beams Yb:fibre laser welding process for Grade 2205 duplex stainless steel | Bolut, Maxime |
| 2018 | Experimental investigation of bubble behaviours in domestic heat pump water heating system | Qin, Jianbo |
| 2018 | A study of pre-ignition and knock in an optical spark ignition engine | Vafamehr, Hassan |
| 2018 | Investigation on the multiscale multiphysics based approach to modelling and analysis of precision machining of metal matrix composites (MMCs) and its application perspectives | Niu, Zhichao |
| 2018 | A Study on the Effects of Combined Diesel-Hydrogen Combustion on Diesel Engines using Experimental and Simulation Techniques | Al-Asadi, Ward |
| 2018 | Investigation of diesel-ethanol and diesel-gasoline dual fuel combustion in a single cylinder optical diesel engine | Mirmohammadsadeghi, Mahmoudreza |
| 2018 | Design and fabrication of GaPO4 ultrasonic transducer for NDT at high temperatures | Kostan, Mario |
| 2018 | Bio-foams for thermal packaging applications | Torrejon, Virginia Martin |
| 2018 | Towards the noise reduction of synthetic jet actuators using lobed orifices | Jeyalingam, Jonne |
| 2017 | Influences on consumers’ decision making and recognition memory: An investigation using fMRI, EEG and behavioural methods | Li, Lin |
| 2018 | A novel, internally structured stainless steel implant with titanium characteristics | Yazdifar, Mohammadreza |
| 2018 | Experimental study of a Miller cycle based approach for an efficient boosted downsized gasoline Di engine | Li, Yuanping |
| 2018 | Flow boiling in vertical small to micro scale tubes | Al Gaheeshi, Asseel Majed Rasheed |
| 2018 | Investigation of residual stresses in X65 narrow-gap pipe girth welds | Ren, Yao |
| 2018 | Experimental study of single sided ventilation through a multi-configuration slotted louvre system | O'Sullivan, Paul D. |
| 2018 | An experimental investigation of lean-burn dual-fuel combustion in a heavy duty diesel engine | May, Ian Alexander |
| 2017 | Statistical modelling of ECDA data for the prioritisation of defects on buried pipelines | Bin Muhd Noor, Nik Nooruhafidzi |
| 2016 | Mechanical behaviour of lined pipelines under welding and impact | Obeid, Obeid |
| 2018 | Electroencephalography (EEG) profile and sense of body ownership: a study of signal processing, proprioception and tactile illusion | Shahriari, Sheyda |
| 2017 | The forced vibrations of a cylinder at low Reynolds number flow, an investigation of the non-lock-in and lock-in regions | Angelopoulos, Konstantinos |
| 2018 | Vortex shedding-induced noise reduction using (DBD) plasma actuator | AL-Sadawi, Laith Ayad |
| 2018 | Crack tip opening displacement (CTOD) in single edge notched bend (SEN(B)) | Khor, WeeLiam |
| 2017 | Experimental and numerical study of air distribution and thermal environment control for chilled food manufacturing facilities | Parpas, Dimitris |
| 2018 | Numerical and experimental investigation of a multi-pass heat-pipe-based heat exchanger | Mroue, Hassan |
| 2018 | Radial turbine expander design, modelling and testing for automotive organic Rankine cycle waste heat recovery | Alshammari, Fuhaid |
| 2017 | An experimental study of ethanol-diesel dual-fuel combustion for high efficiency and clean heavy-duty engines | Bernardes Pedrozo, Vinícius |
| 2015 | Investigation into using Stand-Alone Building Integrated Photovoltaic System (SABIPV) as a fundamental solution for Saudi rural areas and studying the expected impacts | Albaz, Abdulkarim |
| 2017 | Oscillatory behaviour and strategy to reduce drilling vibration | Che Kar, Suriani Binti |
| 2017 | Experimental and computational study to improve energy efficiency of frozen food retail stores | Mylona, Zoi |
| 2017 | Stress-Strain data for metals in bar and sheet form: strain rate, thickness and temperature influences | Roshanaei, Sina |
| 2017 | Fatigue life prediction of threaded pipe connection | Beheshti, Milad |
| 2017 | The effects of Alumina purity, TICUSIL® braze preform thickness and post-grinding heat treatment on the microstructure, mechanical and nanomechanical properties of Alumina-to-Alumina brazed joints | Kassam, Tahsin Ali |
| 2017 | Guided wave evaluation of pipes using the first and second order torsional wave mode | Deere, Matthew |
| 2017 | The mechanism of leak-before-break fracture and its application in engineering critical assessment | Bourga, Renaud |
| 2017 | Statistical methods for the analysis of corrosion data for integrity assessments | Tan, Hwei-Yang |
| 2017 | 3D freeform surface measurement on coordinate measuring machine using photometric stereo method | Somthong, Thammarat |
| 2017 | Experimental and computational study of indirect expansion solar assisted heat pump system with latent heat storage for domestic hot water production | Youssef, Walid Mohamed Khalil Abdalla |
| 2016 | Development of an active morphing wing with novel adaptive skin for aircraft control and performance | Kaygan, Erdogan |
| 2016 | Effects of a Niobium-Boron grain refiner on undercooling and microstructural evolution of aluminium silicon alloys | Lloyd, Samuel Jordan |
| 2017 | Experimental investigations of anhydrous and wet ethanol combustion in a spark iginition engine | Metzka Lanzanova, Thompson Diordinis |
| 2014 | Investigation into the contribution of the MC-DC process on microstructural evolution of direct chill cast round ingots of 6XXX series aluminium alloys with an aim to reduce homogenisation | Jones, Simon John |
| 2017 | Planar laser induced fluorescence imaging and analysis with ethanol blended fuels in a direct injection spark ignition engine | Liu, Quan |
| 2017 | Processing of MgB2 bulk superconductor by infiltration and growth | Bhagurkar, Ashutosh |
| 2017 | Experimental and theoretical investigation of CO2 trans-critical power cycles and R245fa organic Rankine cycles for low-grade heat to power energy conversion | Li, Liang |
| 2016 | Development of generic grain refiner alloys for cast and wrought Al-alloys containing silicon and zirconium | Djan, Edward Kwafo |
| 2016 | Theoretical and experimental investigation of a novel hydraulically assisted turbocharger system for future automotive applications | Justus, Jack |
| 2016 | Plasma pre-treatment for adhesive bonding of aerospace composite components | Navarro Rodriguez, Berta |
| 2017 | An experimental investigation into tool wear in micro-drilling of aluminium, aluminium/copper metal alloys and carbon fibre reinforced composites | Cheng, Ming-Yi |
Collection's Items (Sorted by Submit Date in Descending order): 101 to 150 of 644
