Please use this identifier to cite or link to this item: http://bura.brunel.ac.uk/handle/2438/23569
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAlisawi, A-
dc.contributor.authorCollins, P-
dc.contributor.authorCashell, K-
dc.date.accessioned2021-11-20T23:16:53Z-
dc.date.available2021-11-20T23:16:53Z-
dc.date.issued2021-10-15-
dc.identifier.citationAlisawi, A.T., Collins, P.E.F. and Cashell, K.A. (2021) ‘Nonlinear Analysis of a Steel Frame Structure Exposed to Post-Earthquake Fire’, Fire, 4 (4), 73, pp. 1-23. doi: 10.3390/fire4040073.en_US
dc.identifier.urihttps://bura.brunel.ac.uk/handle/2438/23569-
dc.description.abstractCopyright: © 2021 by the authors. The probability of extreme events such as an earthquake, fire or blast occurring during the lifetime of a structure is relatively low but these events can cause serious damage to the structure as well as to human life. Due to the significant consequences for occupant and structural safety, an accurate analysis of the response of structures exposed to these events is required for their design. Some extreme events may occur as a consequence of another hazard, for example, a fire may occur due to the failure of the electrical system of a structure following an earthquake. In such circumstances, the structure is subjected to a multi-hazard loading scenario. A post-earthquake fire (PEF) is one of the major multi-hazard events that is reasonably likely to occur but has been the subject of relatively little research in the available literature. In most international design codes, structures exposed to multi-hazards scenarios such as earthquakes, which are then followed by fires are only analysed and designed for as separate events, even though structures subjected to an earthquake may experience partial damage resulting in a more severe response to a subsequent fire. Most available analysis procedures and design codes do not address the association of the two hazards. Thus, the design of structures based on existing standards may contribute to a significant risk of structural failure. Indeed, a suitable method of analysis is required to investigate the behaviour of structures when exposed to sequential hazards. In this paper, a multi-hazard analysis approach is developed, which considers the damage caused to structures during and after an earthquake through a subsequent thermal analysis. A methodology is developed and employed to study the nonlinear behaviour of a steel framed structure under post-earthquake fire conditions. A three-dimensional nonlinear finite element model of an unprotected steel frame is developed and outlined. View Full-Texten_US
dc.format.extent1 - 23-
dc.format.mediumElectronic-
dc.language.isoen_USen_US
dc.publisherMDPI AGen_US
dc.rightsCopyright: © 2021 by the authors. Licensee MDPI, Basel, SwitzerlandThis is an open access article distributed under the Creative Commons Attribution License (https://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited-
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/-
dc.subjectfireen_US
dc.subjectearthquakeen_US
dc.subjectfinite element analysisen_US
dc.subjectAbaqusen_US
dc.subjectmulti hazard analysisen_US
dc.titleNonlinear Analysis of a Steel Frame Structure Exposed to Post-Earthquake Fireen_US
dc.typeArticleen_US
dc.identifier.doihttps://doi.org/10.3390/fire4040073-
dc.relation.isPartOfFire-
pubs.issue4-
pubs.publication-statusPublished-
pubs.volume4-
dc.identifier.eissn2571-6255-
Appears in Collections:Dept of Mechanical and Aerospace Engineering Research Papers

Files in This Item:
File Description SizeFormat 
FullText.pdf9.72 MBAdobe PDFView/Open


This item is licensed under a Creative Commons License Creative Commons