Please use this identifier to cite or link to this item: http://bura.brunel.ac.uk/handle/2438/23015
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSalimian, A-
dc.contributor.authorHasnath, A-
dc.contributor.authorAnguilano, L-
dc.contributor.authorOnwukwe, U-
dc.contributor.authorAminishahsavarani, A-
dc.contributor.authorSachez, C-
dc.contributor.authorUpadhyaya, H-
dc.date.accessioned2021-07-29T08:21:18Z-
dc.date.available2021-07-29T08:21:18Z-
dc.date.issued2020-05-13-
dc.identifier472-
dc.identifier.citationSalimian, A., Hasnath, A., Anguilano, L., Onwukwe, U., Aminishahsavarani, A., Sachez, C. and Upadhyaya, H. (2020) ‘Highly Conductive Zinc Oxide Based Transparent Conductive Oxide Films Prepared Using RF Plasma Sputtering Under Reducing Atmosphere’, Coatings. MDPI AG, 10 (5), 472, pp. 1-17. doi: 10.3390/coatings10050472.en_US
dc.identifier.urihttps://bura.brunel.ac.uk/handle/2438/23015-
dc.description.abstract© 2020 by the authors. The spectral properties and colour functions of a radio frequency (RF)-based sputtering plasma source was monitored during consecutive sputter deposition of zinc doped indium oxide (IZO) thin films under argon and argon/hydrogen mix. The effect of target exposure to the hydrogen gas on charge density/mobility and spectral transmittance of the deposited films was investigated. We demonstrate that consecutive exposure to the hydrogen gas during the deposition process progressively affects the properties of thin films with a certain degree of continuous improvement in electrical conductivity while demonstrating that reverting to only argon from argon/ hydrogen mix follows a complex pathway, which has not been reported previously in such detail to our knowledge. We then demonstrate that this effect can be used to prepare highly conductive zinc oxide thin films without indium presence and as such eliminating the need for the expensive indium addition. We shall demonstrate that complexity observed in emission spectra can be simply identified by monitoring the colour of the plasma through its colour functions, making this technique a simple real-time monitoring method for the deposition process.en_US
dc.description.sponsorshipGrand Challenge Research Fund (GCRF) SUNRISE program, No. EP/P032591/1.en_US
dc.format.extent1 - 17-
dc.format.mediumElectronic-
dc.format.mediumElectronic-
dc.language.isoen_USen_US
dc.publisherMDPI AGen_US
dc.rights© 2020 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.-
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/-
dc.subjectsputteringen_US
dc.subjectZnOen_US
dc.subjectIZOen_US
dc.subjectTCOen_US
dc.subjectplasmaen_US
dc.subjectconducting oxidesen_US
dc.subjecttransparent; hydrogenen_US
dc.titleHighly conductive zinc oxide based transparent conductive oxide films prepared using RF plasma sputtering under reducing atmosphereen_US
dc.typeArticleen_US
dc.identifier.doihttps://doi.org/10.3390/COATINGS10050472-
dc.relation.isPartOfCoatings-
pubs.issue5-
pubs.publication-statusPublished-
pubs.volume10-
dc.identifier.eissn2079-6412-
Appears in Collections:The Experimental Techniques Centre

Files in This Item:
File Description SizeFormat 
FullText.pdf4.39 MBAdobe PDFView/Open


This item is licensed under a Creative Commons License Creative Commons