Please use this identifier to cite or link to this item: http://bura.brunel.ac.uk/handle/2438/17246
Title: High efficiency ethanol-diesel dual-fuel combustion: A comparison against conventional diesel combustion from low to full engine load
Authors: Pedrozo, VB
May, I
Guan, W
Zhao, H
Keywords: ethanol;low carbon fuel;dual-fuel combustion;greenhouse gas emissions
Issue Date: 25-May-2018
Publisher: Elsevier
Citation: Pedrozo, V.B. et al. (2018) 'High efficiency ethanol-diesel dual-fuel combustion: A comparison against conventional diesel combustion from low to full engine load', Fuel, 230, pp. 440 - 451. doi: 10.1016/j.fuel.2018.05.034.
Abstract: Comparisons between dual-fuel combustion and conventional diesel combustion (CDC) are often performed using different engine hardware setups, exhaust gas recirculation rates, as well as intake and exhaust manifold pressures. These modifications are usually made in order to curb in-cylinder pressure rise rates and meet exhaust emissions targets during the dual-fuel operation. To ensure a fair comparison, an experimental investigation into dual-fuel combustion has been carried out from low to full engine load with the same engine hardware and identical operating conditions to those of the CDC baseline. The experiments were executed on a single cylinder heavy-duty diesel engine at a constant speed of 1200 rpm and various steady-state loads between 0.3 and 2.4 MPa net indicated mean effective pressure (IMEP). Ethanol was port fuel injected while diesel was direct injected using a high pressure common rail injection system. The start of diesel injection was optimised for the maximum net indicated efficiency in both combustion modes. Varied ethanol energy fractions and different diesel injection strategies were required to control the in-cylinder pressure rise rate and achieve highly efficient and clean dual-fuel operation. In terms of performance, dual-fuel combustion attained higher net indicated efficiency than the CDC mode from 0.6 to 2.4 MPa IMEP, with a maximum value of 47.2% at 1.2 MPa IMEP. The comparison also shows the use of ethanol resulted in 26% to 90% lower nitrogen oxides (NOx) emissions than the CDC operation. At the lowest engine load of 0.3 MPa IMEP, the dual-fuel operation led to simultaneous low NOx and soot emissions at the expense of a relatively low net indicated efficiency of 38.9%. In particular, the reduction in NOx emissions introduced by the utilisation of ethanol has the potential to decrease the engine running costs via lower consumption of aqueous urea solution in the selective catalyst reduction system. Moreover, the dual-fuel combustion with a low carbon fuel such as ethanol is an effective means of decreasing the use of fossil fuel and associated greenhouse gas emissions.
URI: https://bura.brunel.ac.uk/handle/2438/17246
DOI: https://doi.org/10.1016/j.fuel.2018.05.034
ISSN: 0016-2361
Other Identifiers: ORCID iD: Hua Zhao https://orcid.org/0000-0002-7876-804X
Appears in Collections:Dept of Electronic and Electrical Engineering Research Papers

Files in This Item:
File Description SizeFormat 
FullText.pdfCopyright © Elsevier 2018. Some rights reserved. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/ (see https://www.elsevier.com/about/policies/sharing). It is available online at DOI URL: https://doi.org/10.1016/j.fuel.2018.05.0341.22 MBAdobe PDFView/Open


This item is licensed under a Creative Commons License Creative Commons