Please use this identifier to cite or link to this item: http://bura.brunel.ac.uk/handle/2438/16941
Title: Aerodynamic noise reduction by plasma actuators for a flat plate with blunt trailing edge
Authors: Al-Sadawi, L
Chong, TP
Kim, J-H
Issue Date: 2018
Publisher: Elsevier
Citation: Journal of Sound and Vibration
Abstract: An experimental study of active control of the vortex shedding narrowband tonal noise from the blunt trailing edge of a flat plate with elliptical leading edge was performed using three different configurations of the single dielectric barrier discharge (DBD) plasma actuators. These devices can produce electric winds in the tangential, downward and spanwise directions, respectively, near the blunt trailing edge. Acoustics and flow measurements were carried out simultaneously at Reynolds numbers between 0.75 x 105 and 4 x 105, based on the flat plate chord length, inside an aeroacoustic facility. The input alternating-current (AC) voltages to these plasma actuators were relatively low at < 5 kV. The “tangential” plasma actuator is not very effective in the suppression of vortex shedding tonal noise (maximum 1–2 dB reduction), although the spatial distribution of the wake coherent modes calculated from the proper orthogonal decomposition become more compact than that produced by the baseline plasma off case, resulting in a shift of the tone frequency to a higher value. The “downward” plasma actuator can suppress the vortex shedding tonal noise almost completely at the tone frequency (about 15 dB reduction at input voltage of 4.2 kV). The mechanism is related to the induced plasma jet acting as a virtual barrier to inhibit the interaction between the upper and lower separating shear layers, and to delay the formation of the vortex shedding. The “spanwise” plasma actuator, which can project array of streamwise vortices into the wake and compartmentalise the vortex shedding across the span, demonstrated a more superior tonal noise reduction capability at low input voltage (about 12 dB reduction at 3.0 kV). It is found that the plasma jet magnitude between 9–10% and 7% of the freestream velocity for the downward and spanwise plasma actuators, respectively, will be sufficient to achieve an effective reduction of the vortex shedding tonal noise.
URI: http://bura.brunel.ac.uk/handle/2438/16941
ISSN: 0022-460X
Appears in Collections:Dept of Mechanical and Aerospace Engineering Research Papers

Files in This Item:
File Description SizeFormat 
FullText.pdf5.72 MBAdobe PDFView/Open


Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.