Please use this identifier to cite or link to this item: http://bura.brunel.ac.uk/handle/2438/10137
Full metadata record
DC FieldValueLanguage
dc.contributor.authorZhou, X-
dc.contributor.authorOladiran, OG-
dc.contributor.authorDong, W-
dc.contributor.editorOlek, J-
dc.contributor.editorWeiss, J-
dc.coverage.spatialPurdue University, West Lafayette, Indiana, USA-
dc.coverage.spatialPurdue University, West Lafayette, Indiana, USA-
dc.date.accessioned2015-02-06T11:08:07Z-
dc.date.available2014-07-24-
dc.date.available2015-02-06T11:08:07Z-
dc.date.issued2014-
dc.identifier.citationProceedings of the 4th International Conference on the Durability of Concrete Structures, ICDCS 2014, pp. 327 - 334, 2014en_US
dc.identifier.urihttp://docs.lib.purdue.edu/icdcs/2014/materialscharacterization/6/-
dc.identifier.urihttp://bura.brunel.ac.uk/handle/2438/10137-
dc.description.abstractA new experimental method by utilizing elliptical rings to replace circular rings recommended by ASTM and AASHTO was explored for assessing cracking potential of concrete and other cement-based materials under restrained condition. A series of thin and thick elliptical concrete rings were tested alongside circular ones until cracking. Cracking age, position, and propagation were carefully examined. It is found that thin elliptical rings with appropriate geometry can initiate cracks quicker than circular ones, which is desirable for accelerating the ring test. However, thick elliptical rings seem not to exhibit a desirable geometry effect of accelerating ring test compared with circular ones. There were multiple visible cracks that occurred in an elliptical ring and some cracks were initiated but did not propagate through the ring wall. In comparison, there was only one crack in the circular rings. Finally, the features of multiple cracks in restrained elliptical rings were examined and their impact on interpreting elliptical ring test results was elaborated. © 2014 4th International Conference on the Durability of Concrete Structures.en_US
dc.formatPaper-
dc.formatPaper-
dc.format.extent327 - 334-
dc.format.extent327 - 334-
dc.language.isoenen_US
dc.publisherPurdue University Pressen_US
dc.source4th International Conference on the Durability of Concrete Structures-
dc.source4th International Conference on the Durability of Concrete Structures-
dc.subjectConcreteen_US
dc.subjectCracken_US
dc.subjectDrying Shrinkageen_US
dc.subjectEarly-ageen_US
dc.subjectEarly strengthen_US
dc.subjectRestraint (of concrete)en_US
dc.subjectShrinkage crackingen_US
dc.subjectTemperature stressen_US
dc.subjectVolume changeen_US
dc.titleOn utilization of elliptical rings in assessing cracking tendency of concreteen_US
dc.typeArticleen_US
dc.relation.isPartOfProceedings of the 4th International Conference on the Durability of Concrete Structures, ICDCS 2014-
dc.relation.isPartOfProceedings of the 4th International Conference on the Durability of Concrete Structures, ICDCS 2014-
pubs.finish-date2014-07-26-
pubs.finish-date2014-07-26-
pubs.place-of-publicationPurdue University, West Lafayette, Indiana, USA-
pubs.publication-statusPublished-
pubs.publication-statusPublished-
pubs.start-date2014-07-24-
pubs.start-date2014-07-24-
pubs.organisational-data/Brunel-
pubs.organisational-data/Brunel/Brunel Staff by College/Department/Division-
pubs.organisational-data/Brunel/Brunel Staff by College/Department/Division/College of Engineering, Design and Physical Sciences-
pubs.organisational-data/Brunel/Brunel Staff by College/Department/Division/College of Engineering, Design and Physical Sciences/Dept of Mechanical, Aerospace and Civil Engineering-
pubs.organisational-data/Brunel/Brunel Staff by College/Department/Division/College of Engineering, Design and Physical Sciences/Dept of Mechanical, Aerospace and Civil Engineering/Civil Engineering-
pubs.organisational-data/Brunel/Brunel Staff by Institute/Theme-
pubs.organisational-data/Brunel/Brunel Staff by Institute/Theme/Institute of Materials and Manufacturing-
pubs.organisational-data/Brunel/Brunel Staff by Institute/Theme/Institute of Materials and Manufacturing/Structural Integrity-
pubs.organisational-data/Brunel/University Research Centres and Groups-
pubs.organisational-data/Brunel/University Research Centres and Groups/Brunel Business School - URCs and Groups-
pubs.organisational-data/Brunel/University Research Centres and Groups/Brunel Business School - URCs and Groups/Centre for Research into Entrepreneurship, International Business and Innovation in Emerging Markets-
pubs.organisational-data/Brunel/University Research Centres and Groups/School of Health Sciences and Social Care - URCs and Groups-
pubs.organisational-data/Brunel/University Research Centres and Groups/School of Health Sciences and Social Care - URCs and Groups/Brunel Institute for Ageing Studies-
pubs.organisational-data/Brunel/University Research Centres and Groups/School of Health Sciences and Social Care - URCs and Groups/Brunel Institute of Cancer Genetics and Pharmacogenomics-
pubs.organisational-data/Brunel/University Research Centres and Groups/School of Health Sciences and Social Care - URCs and Groups/Centre for Systems and Synthetic Biology-
Appears in Collections:Brunel Design School Research Papers

Files in This Item:
File Description SizeFormat 
Fulltext.pdf1.78 MBAdobe PDFView/Open


Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.